Joined: 12/2/2010 Silver Member 
Forum Posts: 168
| Site Reviews Total: | 1 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
Hello the pick you've tried to show is from my album. when I did my repair I was lucky I found a hinge but they only had the one, A stop gap till you can find one,, which I was going to use, is, the two legs of the hinge that go into the door need to be drilled through to outside of the hinge, a hole no thicker than the diameter of the old bolts holding the hinge in place. Buy two bolts long enough to go through the hinge and through the door and bolt the hinge into place. As said this is a stop gap but will let you use your F/C till you locate a propper hinge,hope this makes scence?? if not just ask Jock
|
Topic: 1993pullamn door hinge
