Hi
when towing the 1995 Pennine Pullman the cover keeps ballooning up making it difficult to see behind. This happens at speed on motorways. Any ideas how to stop it, or why its happening - I've tightened the elastic shock cord as much as I can.
Thx
I had this happen to me a few weeks ago. My transit cover is less than a year old so I contacted Pennine and they sent me new elastic rope/cord. I have just returned from holiday and transit cover was fine all the way there and back.
Thnx for ideas guys. Have tried straps across back and length ways. Where can I get new shock cord? I know its lost a lot of its elasticity. and the cover sags.
Its usually cars that are taller than the van that cause this like sharans and galaxys and is the way the air flows over it. You can use a coupke nof bungees overs the top to secure it.
------------- Good friends are hard to find, difficult to leave and impossible to forget.
Go on eBay for the shockcord - usually half the price of places like B&Q especially for the length you need. When fitting remember to make it short enough to stretch. Put the cover on and then feed the shock cord through so it it almost tight just through the eyelets . Once pulled down over the round hooks that should give it enough of a stretch to hold tight.
Quote: Originally posted by Jan P on 21/8/2012Its usually cars that are taller than the van that cause this like sharans and galaxys and is the way the air flows over it. You can use a coupke nof bungees overs the top to secure it.
Yes, I was quite surprised to see this. I can't see over ours anyway, so a little billowing makes not much difference!