Joined: 13/9/2004 
Forum Posts: 4861 Tent Reviews: 2
Site Reviews Total: | 5 |
|
Site Reviews 2025: | 0 |
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
|
Site Nights 2025: | 0 |
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
|
Spent yesterday evening messin around with the wiring on the tow bar that is to tow our conway crusader. Can't get the brake lights to work. Anyway we took the socket off the towbar only to find the pins corroded and convinced ourselves that we had found the problem. All the other lights work, just not the brake lights. Well hubby checked all the car electric systems out this afternoon at work and reported everything fine. We ordered a new socket convinced that we had it sorted. Then this afternoon our friend where we store the camper phoned to say that he had connected his car to the camper and guess what, no brake lights. So the problem is in the camper wiring. But where to start.
Also we we had the camper plugged in to the mains yesterday and made sure the hot water tank was full, but once again, everytime we switched on the water heater it tripped out the leccy. The house leccy too. Are we going to have the same problem on site? How can we check that one out. Anyone else had these problems?
------------- Neelie
<(*?*)>
|