Home

   Log in or Register



Insurance Quotes
forums Campsite Search Comp Directory tips virtual brochure Profile
Tent and Awning Reviews Competitions Caravans and Motorhomes For Sale Shopping Diary Advent Calendar

Advertisement

Message Forums

Welcome Guest Register Login Search The Forum Posts Since Last Visit
 Reception - All Forums
  Trailer Tents and Folding Campers
Share   Post on X / Twitter  Share on Facebook  Email  Printer Friendly Version Print
Subject Topic: pennine pullman Post Reply Post New Topic
06/1/2020 at 10:13am
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

Hello and a Happy New Year to All, I have just bought a 2008 Pennine Pullman which is fine apart from an issue with the water, the unit has a Truma heater fitted which gets hot but does this contain a pump or is the external Whale pump I clip into the side the only pump on the unit? I have tested the Whale pump and it works, I have tried a voltage tester on the inside Whale inlet socket and tap 12v outlet and seems to be power so can only presume it could be something to do with the Truma heater. Any guidance would be much appreciated here and thank you.


06/1/2020 at 12:56pm
 Location: 
 Outfit: 
View marg6's Profile View Profile   Reply to marg6 Reply   Quote marg6 Quote  
Joined: 11/8/2016

Diamond Member
Diamond Member

Forum Posts:   3126

Site Reviews Total: 3
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 3  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 15
Site Nights 2018: 0

the only pump on it is the one you put in your barrel of water outside, so you turn on the water heater and wait about 15 mins or so, then when you turn a tap on this provides power to the pump which will pump up cold water into the heater forcing the hotwater along the pipe work and out of the tap, simple as that! don't forget tho you need to make sure esp at this time of year that you have drained the water out completely when not in use as the ice will burst pipes


06/1/2020 at 6:47pm
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

thanks Marg6 I will give it another go, maybe the tap is faulty or a fuse somewhere. I know the Whale pump is working as I have tried this on my old Conway unit. Now I know there is no secondary pump that eliminates that issue so thank you.


06/1/2020 at 6:52pm
 Location: 
 Outfit: 
View marg6's Profile View Profile   Reply to marg6 Reply   Quote marg6 Quote  
Joined: 11/8/2016

Diamond Member
Diamond Member

Forum Posts:   3126

Site Reviews Total: 3
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 3  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 15
Site Nights 2018: 0

what exactly is or isn't happening? its not clear from your first post as to what you are trying to fix


06/1/2020 at 6:55pm
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

The Truma heater fitted to my Pennine Pullman has two valves coming off it that can be screwed in or out, anybody know what there purpose is?


Advertisement



06/1/2020 at 7:27pm
 Location: 
 Outfit: 
View marg6's Profile View Profile   Reply to marg6 Reply   Quote marg6 Quote  
Joined: 11/8/2016

Diamond Member
Diamond Member

Forum Posts:   3126

Site Reviews Total: 3
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 3  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 15
Site Nights 2018: 0

do you mean like this one? https://www.ebay.co.uk/itm/CARAVAN-MOTORHOME-CAMPERVAN-TRUMA-ULTRASTORE-WATER-HEATER/293406451553?hash=item4450632761:g:pGsAAOSwxcteD09r I think if thwe answer is yes its the same as that then its pretty self explanatory


06/1/2020 at 9:01pm
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

Hello Marg6, I am just not getting any pumping action when I turn on the tap, the heater is not the problem I am guessing so could be a fuse or the micro switch on the tap. the truma heater fitted has two valves or taps which I now presume are to drain it down? Do these need to be closed off to prime the system?    I will take another look at the weekend and see if I can rectify and thanks for taking the time to reply.


06/1/2020 at 9:31pm
 Location: Warwickshire
 Outfit: Gobur Clubman
View kpnuts81's Profile View Profile   Reply to kpnuts81 Reply   Quote kpnuts81 Quote  
Joined: 18/7/2009

Platinum Member
Platinum Member

Forum Posts:   816

Site Reviews Total: 7
Site Reviews 2024: 0  
Site Reviews 2023: 1  
Site Reviews 2022: 0  
Site Reviews 2021: 1  
Site Reviews 2020: 0  
Site Reviews 2019: 1  
Site Reviews 2018: 1  
Site Nights 2024: 0
Site Nights 2023: 7
Site Nights 2022: 0
Site Nights 2021: 14
Site Nights 2020: 0
Site Nights 2019: 14
Site Nights 2018: 1

You need to close the 2 drain taps insert your whale pump into a barrel of water , open the hot tap, turn on the pump and that in turn should force out the air, which may take a couple of minutes, when the hot water runs freely without any coughing and spluttering do the same with the cold tap, always do this before turning on the water heater, if the drain down taps are open all that will be happening is the water will be running out the drain off and not reaching the kitchen tap


via mobile 07/1/2020 at 4:59am
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

Thanks kpnuts I will try at the weekend and appreciate your reply.


via mobile 08/1/2020 at 10:59pm
 Location: Preston
 Outfit: None
View pnefan's Profile View Profile   Reply to pnefan Reply   Quote pnefan Quote  
Joined: 25/2/2013

Platinum Member
Platinum Member

Forum Posts:   923

Site Reviews Total: 9
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 2  
Site Reviews 2019: 1  
Site Reviews 2018: 2  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 7
Site Nights 2019: 2
Site Nights 2018: 2

From memory you will have to close the two drain down taps/valves. The tank wont fill if these are left open.


Advertisement



via mobile 09/1/2020 at 8:25pm
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

Thanks to all for your input on this I am hopefully going to resolve the issue at the weekend, watch this space!


11/1/2020 at 11:34am
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

Just an update on my issue with the water on my Pennine Pullman, got the water coming through the tap and also the hot water resolved. Problem is the pump housing on the external unit where the pump slots in has two clips one top and one bottom that rotate to lock the pump in place, however the bottom one is missing so not getting a good connection, I guess I will have to buy the whole external housing which looks easy to replace. I have had a quick search on E-Bay and they all seem to be the newer version where mine is a bit different but I will get one no doubt. Anyway thanks to all for your advice and it was all appreciated.


11/1/2020 at 12:05pm
 Location: Royal Forest of Dean
 Outfit:  Swift Major 4SB
View Rob and Tina's Profile View Profile   Reply to Rob and Tina Reply   Quote Rob and Tina Quote  
Joined: 17/10/2007

Diamond Member
Diamond Member

Forum Posts:   3375

Site Reviews Total: 0
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

Have a look at the Leisureshopdirect website, they sell loads of little bits like this. If you can't see what you want it's worth giving them a call, they are very helpful.

Rob


11/1/2020 at 1:17pm
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

cheers Rob I will take a look, it is the old Truma Crystal Mk2 compact housing which has these fiddly clips that rotate. You can get a Truma Ultraflow conversion kit that contains a new compact housing and pistol grip on E-Bay for £40 which looks easy to convert so i will probably go with this. Just need to sell my old Conway Countryman now to free up some space so here's hoping.


26/1/2020 at 2:36pm
 Location: Leigh Lancashire
 Outfit: Pennine Pullman
View rwig555's Profile View Profile   Reply to rwig555 Reply   Quote rwig555 Quote  
Joined: 04/1/2016

Standard Member
Standard Member

Forum Posts:   10

Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

Anybody got a set of Pennine Pullman 2008 model in brown, bed skirts for sale?



In order to post a reply you will need to register, or if already registered please log in here

Prev       Next
Quick Links - All Forums - Trailer Tents and Folding Campers - Top of Page

Printer Friendly Version Printable version      Share   Post on X / Twitter  Share on Facebook  Email


Latest News, Discounts and Competitions  see all...














5414 Visitors online !

Free UKCampsite.co.uk Window Sticker  -  Recommend to Friend  -  Add a Missing Campsite

[Message Forums]  [Caravan Sites & Camping]  [Company Listings]  [Features / Advice]  [Virtual Brochure]  [Shop!]
[Reception]  [Competitions]  [Caravans & Motorhomes For Sale]  [Event Diary]  [Contact Us]  [Tent Reviews



Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2024


Advertisement


Advertisement


UKCampsite.co.uk
2024 Advent Calendar


Advent Calendar

24 Daily Prizes PLUS a Christmas Day Star Prize worth £999

Request a Reminder