Hi everybody . I'm in the process of upgrading my water pump system from truma crystal , to truma ultraflow . The problem is , the upgrade kit states the + & - wire colours should be green , & white respectively. The colours are red & white striped , & purple & black striped . I suppose I could just crimp the spade connectors , & hope for the best . The problem is one of the connectors is 4.8 , & the other is 6.3 mm . Thanks in anticipation of any replies .
I have done this upgrade last year to my pathfinder, ended up just buying an crimp tool off amazon as it came with a set of spades and just replaced the all to fit, there was plenty of cable to make the change