Message Forums

Hi,

And welcome back to m/homing............

kevin

Hi Mike and Maggie

I've an '88 Autosleeper Rambler on a Talbot Express base. Hope yours came back from its checks, service and MOT ok! If there's anything you need to ask I'm sure there'll be someone to help!

Phil

        WHAT TOOK YOU SO LONG?

    WELCOME BACK MIKE AND MAGGIE & YOUR AUTOSLEEPER!!

XXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Having posted that design I have to say...I've yet to sleep on it!! I don't think it bears much weight though in the position it sits in so I'm sure you'll be fine.

I have a friend on another forum with a similar van and he's given me some more photos if you need them.

These are the actual dimensions form his infill piece and I think it's an original

Top : 89cm x 28cm
longer Leg : 38cm x 28cm
Short Leg : 25cm x 28cm.

The measurements I used weren't too far off considering they were guesstimates!

Top 90 x 27.5cm

Long leg 40.5 x 27.5cm

Short leg 30 x 27.5cm

I used 12mm ply for construction.

Good luck, watch the fingers!

Phil

Quote: Originally posted by Ramblervan on 08/7/2007

---

Having posted that design I have to say...I've yet to sleep on it!! I don't think it bears much weight though in the position it sits in so I'm sure you'll be fine.

I have a friend on another forum with a similar van and he's given me some more photos if you need them.

---

18mm will be fine as long as you take it in to account although as the differencs above show, the measurements need only be somewhere near to work properly.

I'll email some more pics to you.

Phil 

You're welcome Mike. Let me know if you need any other help.

Phil