Message Forums

Hi

Does anyone know how to get the heating to work in the back of the 640 when it's on the move? the normal heating from the engine is fine in the front but it's freezing in the back cos it doesn't filter thru' that far!!

Cheers

I don't think it's possible without the gas heater switched on, on mine anyway.

Sorry I can't help more.

You cannot use your gas heater in motion as the pilot light may blow out and cause an explosion. (thats what the govenment say anyway!)

You best option before setting off, would be to heat the van up until toasty, and then use the vans dash heater to top up.

None of my 12v habitation areas work when the engine it running

mick

I have a Fiat Ducato Elddis Autostratus,with a Carver SL 3002 with hot air blower with auto and manual controller,last year in september I drove from Padstow back to Nottingham with it on as my dear old mum of 90 years young feels the cold and it never went out,and kept the living area nice and warm on No 5.

Pete. 

Hi pete

Thanks for the info - will give it a try

Cheers

Hi Phill,if you look on here and right click and rotate page 8 the TEB & TEN controller is the one I have,it has OFF, MANUAL, & AUTO settings,its the one on the left off the page,I set the fire to 5 or 6 and the blower to 3 or 4 on the MANUAL setting.

just a point the O setting is the MANUAL setting,in the middle.Top is OFF A Bottem is AUTO.

http://www.arcsystems.biz/manuals/%20SPL3002.PDF