Joined: 28/12/2002 Diamond Member
Forum Posts: 8833
Site Reviews Total: | 5 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
Quote: Originally posted by Mick S. on 11/9/2010
does this go between the aerial and the telly? what about the booster thing i already have, is this still needed?
If your aerial is a permanently wired in set up, then yes, you can have the signal finder wired into the circuit, but as we dismantle everything each time we move, then no.
I set up the aerial on the mast and then plug the lead into the signal finder and turn the aerial until I get the strongest signal. Only once that has been established do I then unplug the signal finder and pack it away and then set up my TV and Freeview Box.
We have used a signal booster in the past but we have not needed it since we bought the signal finder.
The signal finder has an "In/Out" so that it can be part of a permenant circuit, but it can also be used as a stand alone unit as I use it. In this case I only use the "In" socket.
I went for the Maplin Signal Finder after reading reviews on this and other ones. I am getting a bit long in the tooth for new fangle fancy bits of kit and I wanted something that I did not have to pour over a manual in the wind and rain as I struggled to understand dials and knobs. We tend not to bother about the TV unless weather conditions force us to be inside and therefore whatever set up we use, has to be able to get a top quality picture with the minimum of faffing about outside in the rain.
Oh, and being a Stingy Jock, it has to be cheap!!!!
------------- Lobey.
|