Joined: 04/5/2008 Standard Member
Forum Posts: 9
| Site Reviews Total: | 0 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
The end panel of my dinette (in centre of motor home) is delaminating the printed wood effect top layer, from the board. It’s puckered up, sort of wavy, almost as if the printed material is too big for the panel and/or has expanded and is pushing up. The edging seems ok with no damage, there is no damp, nothing has been spilled on the panel to our knowledge, the inside side is not affected and it’s quite local spreading down one end of the panel, sometimes its soft and pliable other times it seems brittle, I presume this is temperature variation. Its double sided, but unfortunalty cannot be turned around as it’s not symmetrical. Its 2005 so well out of any warranty.
I did wonder if I applied heat from a hairdryer it might be able to be peeled back and re-glued with spray adhesive.
I can get a replacement panel, but it will cost (arm and a leg) take ages and I will have to transfer all catches décor etc.
any bright ideas?
|
Topic: Board delaminating?
