Message Forums

     HI ALL

    WATER INDICATOR IN VAN NOT WORKING , CHECKED UNDER VAN WIRING ALL SEEMS TO BE OK GONG TO WATER TANK. ALSO CHECKED WIRING BEHIND ZIG PANEL ALL SEEMS TO BE IN THE RIGHT PLACE NO LOOSE WIRES .   SO ANY HELP WOULD BE MOST GRATEFULL  . THANKS.

These tend to be a bit tempramental.  I once read an article regarding this and the work concerned was amazing. 

 BEEN ON LOTS OF SITES BUT ,STILL NO ANSWERS, THANKS ANYWAY,

Oi, Evo, I do the water tank questions.

   I WILL SEE IF I CAN TRY AND SORT IT OUT IT THIS  WEEKEND

  IF NOT GET AUTO SPARK TO CHECK IT OUT CHEERS ANYWAY'

  MIGHT JUST BY A DIP STICK MIGHT BE CHEAPER THAN AUTO SPARK.

  DID WHAT YOU SAID CROSSED TWO WIRES TOGETHER GOT FULL READING  ON GAUGE. TRIED TO GET AT SENSOR ON TANK BUT TO DIFFICULT TO GET AT.. WOULD NEED  TO TAKE THE TANK OUT WHICH I THINK WILL BE TO MUCH OF A JOB WITHOUT GETTING IT ON GARAGE  RAMPS . SO I WILL HAVE TO DO WITHOUT SO THANKS  KONTIKIMAN FOR YOUR REPLY. CHEERS.

Hi Evo, in several cases the indicators only show when then the frewsh water or waste water tanks are virtually full. Once the levels go down a bit ( that's a technical term ) the meter no longer reads anything. This is quite normal IMO.

Phil.

  HI PHIL . NO I AM NOT GETTTING ANY READING OF THE FRESH WATER LEVEL FULL OR EMPTY  . I HAVE FILLED TANK TILL IT OVERFLOWS BUT STILL NO READING ON LEVEL INDICATOR.

  THANKS  FOR THAT STEVE WILL CHECK THAT OUT AND SEE .

   ALSO LIKE THE WEB SITE . VERY INTERESTING STUFF . 

HI Evo 1, do us a favour please and turn off your caps lock when posting, makes it very difficult to read

Cheers!

Ian