Joined: 28/12/2002 Platinum Member 
Forum Posts: 585
| Site Reviews Total: | 1 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
Hi Becky, and welcome to the best club on the net for camping and all things relating to it.
I think tou may have problems, finding floor pan sections for the front of the van, and the same with the wheel arches too. About the only items that are still available are the front door footwells/step boxes, and also the stiffeners that weld underneath the boxes.
The only other alternative is to buy a Mig welder, (they are quite easy to use) and source a supplier of 18 gauge steel sheet in your area. It should be reasonably thick as it carries weight. (Check the phone book for steel stockists, or also car panel suppliers. They can supply the steel sheet if asked)
I don't intend putting you off, but the work can be done, just takes time, that's all.
Good Luck,
Bill
-------------
The Roadrunner
Old Campervans never die, they get rebuilt ...eventually !
|
Topic: MK1 Ford Transit
