Advertisement
Message Forums |
|
18/8/2010 at 4:58am
Location: Estevan Saskatchewan Canada Outfit: None Entered
View Profile
Reply
Quote
|
Joined: 17/8/2010 Standard Member
Forum Posts: 7
Site Reviews Total: | 0 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
DPF are a nightmare!The idea is that diesel particles are filtered out,right?
Now comes the catch:the filter can reach (depending on the use of the vehicle)itīs NORMAL end of live within 100 000km or less!
So,warranty say:sorry,thatīs normal wear and tear!
The manufacturers wonīt say that out loud,but the whole idea of DPF is (at the current stage of technology)bullsh*t.
In the Semi (I think you call them HGV)industry,the same problem persists,but the filter are serviceble,in a special oven,dealerships can burn them out.This had just to be done on my Peterbuild dump truck,87000 km and the DPF is plugged solid.
Flashing PDF light means,that the filter has nearly reached itīs maximum capacity,ones the light is on solid,the filter is toast...
My sympathy to you
P.s:thatīs the reason I prefer older vehicles
|
18/8/2010 at 7:12am
Location: None Entered Outfit: Swift charisma Skoda Scout 4x4
View Profile
Reply
Quote
|
Joined: 19/10/2009 Diamond Member
Forum Posts: 1837
Site Reviews Total: | 4 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
Do you know a good friendly welder??
If so you can remove the exhaust and the DPF, he will then cut the seam around it, then get a hammer and chisel and remove the inners, then re weld it then you need someone with a laptop and lead to dial out the DPF sensor
Check out the Mazda forums
Skoda owners do this and they pass the MOT without any problems
http://briskoda.net/forums/topic/145157-dpf-issue-sorted-at-fraction-of-the-cost-pd-170/
Basically if you have DPF problems like the light coming it could be just a faulty sensor or a broken wire going to it, to keep the DPF clear, take the car and thrash it in second for about a mile this burns off the soot build up from to many short journeys,due to the car not getting hot enough, and always get the DPF fluid top up
Post last edited on 18/08/2010 10:35:17
|
16/9/2010 at 9:02am
Location: oxfordshire Outfit: nr nova
View Profile
Reply
Quote
|
Joined: 18/8/2010 Silver Member
Forum Posts: 103
Site Reviews Total: | 1 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
a DPF filter as has been said filters the soot particles and stores then in the filter. the filter has a sensor at both end and can determine how blocked it is, when it reaches a certain amount of blockage it regenerates itself with out the driver even being aware, to regenerate itself the engine needs to meet certain conditions hot engine, high engine speed high road speed and drive time, all it does it pump extra fuel in to increase combustion chamber temps which then burns off the soot blocking the filter, but
NOW there are problems with the above the main one is when the cars are mainly used around town and citys and never gets up to a good speed for the car to initiate regeneration, the second is 6 speed gearboxes!!!!! why u may think, as i said it needs the right engine speed too which is usually 2500-3500 rpm now on a motorway or dual carrage way when ya in 6th gear at 50-60 mph the engine speed isnt high enough for the car to regenerate itself.
the DPF light will do one of 2 things tay on or flash.
if it stays on you can activate regeneration by driving in a high gear at high speed for 15-20 mins which should do the trick.
but if the light starts to flash or was flashing then the car cant do its own regeneration, the dealer can do a forced regeneration with dedicated equipment but depending on how bad the blockage is sometimes a new DPF is the only way
one other thing especially for mazda owners and some other makes. make sure when u get your car serviced that the fuel additive tank is also topped up, you wont even know your car has it but some manufactures add an additive into the fuel the aid combustion and DPF clearing. most main dealers will do this anyway but if u get you car serviced at a independant they may not do this
|
|
|
8201 Visitors online !
Free UKCampsite.co.uk Window Sticker - Recommend to Friend - Add a Missing Campsite
[Message Forums]
[Caravan Sites & Camping]
[Company Listings]
[Features / Advice]
[Virtual Brochure]
[Shop!]
[Reception]
[Competitions]
[Caravans & Motorhomes For Sale]
[Event Diary]
[Contact Us]
[Tent Reviews]
Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2024
|
Advertisement
|
|
|