Does anyone have a acopy of the instructions for the sunncamp olympic tent. I have a new one (2005 model) and no instructions. Need urgently as off camping tomorrow.
From memory, it had crossed poles which formed the main dome and then each bedroom section had a pole over it.
The poles for the bedrooms were shorter and were colour coded to match the sleeves.
From memory we started by feeding the long poles through the sleeves across the dome, I think these may also have been colour coded. We then put someone inside the dome to hold it up whilst someone strong connected the long poles to the ring and pin (pin goes inside the pole). Work on one pole at a time.
Then feed the bedroom poles through their sleeves and connect and do the same with any porch pole.
Then you need to pull the flysheet over the top - making sure it's the right way round - this is not a obvious as it sounds! In ours the Sunncamp logos were at the front.
Tie the inside of the fly to the poles of the inner and wiggle it all for about an hour to get it all lines up properly so that you can peg and guy it!