Joined: 09/3/2012 Standard Member
Forum Posts: 56
Site Reviews Total: | 0 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
Hi all,
I was given a top tip the other day which I think is a good one having suffered in the past with mold on the flysheet of our old Diablo many years ago. Harsh lesson learnt back then and we always make sure the tent is 100% dry now before finally packing it away when back home.
However, the tent flysheet may well be dry but the guy lines can retain moisture for a long time after the tent dries out. We have even removed guy lines in the past to be on the safe side and it was this that came up in conversation the other evening having met a fellow camper when out and about.
Remove your guy lines, grab a small can of Grangers Fabsil and throw them into a clean bucket and pour the grangers over the guy lines. Leave them soaking overnight and then leave them to dry for a good 24 Hrs. Re-fit them to the tent and you now have water repelant guy lines that are also UV protected so wont fade and look all washed out. Dry tent, dry guy lines, no chance of damp creeping in when packed away, happy days.
Oh and a word of warning. The Fabsil seems to make the guy lines flame proof so if like us your going to take the oportunity to replace your guy lines at the same time, cut them to length first and seal the ends before treating them. As an additional tip, for those like us that like things neat and tidy and got us out of the above problem having not cut ours first, electrical shrink wrap tube cut to inch long lengths and then molded over the end of the guy line works great and looks really good too.
Post last edited on 01/06/2012 08:09:38
|