Message Forums

can anyone help me i have got a Devon 6 Freedom Trail tent by Slumberlux but no instructions on how to erect it

Did you try contacting Slumberlux?

http://www.slumbalux.com/contact_us.php

Hi georgia, I have found the website of the manfacturer but it only shows the devon9. The devon6 is most likely to be the same tent on a smaller scale. here 

from the picture it loks as though there are only 3 poles, so it won't be too difficult.

Thread the poles through the sleeves on the flysheet,

On the bottom of the flysheet there are rings with pins, put the pins into the bottom of the poles. This will give you 3 arches, peg the rings down. make sure the tension straps on the inside of the tent are lying straight and flat on the ground. Peg out the corners, and all other pegging points. peg out the guylines , hang the bedroom inners and lay the groundsheet. 

The instructions that come with tents are very brief anyway, they are usually just a diagram, so not much point in sending for them really. Once you have put it up once it will be easy the next time.

I used to have the 10 berth vancouver model , very similar to this tent, if you are still unsure of the instructions or a first time tenter, let me know and i'll put up the more detailed step by step instructions.