Biarritz 9
Inner Tent
1. Take out the poles and assemble them. Three long poles for the dome, 6 bedroom poles, 2 angles porch poles and 6 short poles for the tent ventilation system.
2. Open out the inner and put in required direction, and insert the three longest poles through the pole sleeves ensuring that all cross the middle.
3. Insert the shorter poles through the pole sleeve across the end of the bedroom.
4. Locate the pole ends on one side of the dome area onto the pin system.
5. Push ends into an arch from opposite sides and locate pole into the pins.
6. Locate the shorter bedroom poles into the pins and push into an arch one at a time from opposite sides.
7. Raise up the inner tent and peg through the metal rings and the bases ensuring the groundsheet is flat and free of creases.
Flysheet
1. Open the flysheet and position it is that the entrance corresponds with the inner doorway.
2. Unroll the inner tent and peg it out ensuring there is no creasing on the groundsheet.
3. Insert the two angled poles into the pole porch sleeves on the outside of the flysheet, noting that the coloured poles match the corresponding coded pole sleeves.
4. Pull the flysheet over the inner tent and position the seams to correspond with the poles on the inner tent.
5. Fabric ties are located on the inside of the flysheet. Tie these to the poles.
6. Peg out the porch area using the anchor straps, and repeat for the anchor straps at the corner of the bedrooms.
7. Peg out the remaining shock chorded pegging points around the base of the flysheet.
8. Attach and peg out all guy lines for additional stability.
9. The detachable porch groundsheet can be fitted using the elasticised hooks and pegging eyelets.
10. Insert the short poles into the sleeves to form the inner tent ventilation feature
Use the canopy poles only in good weather and never leave the canopy unattended.
Topic: ATTENTION ALL BIARRITZ TENT 9 OWNERS
