Advertisement
Message Forums |
|
 Topic: Help! bailey damp around front windows
|
  |
30/3/2024 at 12:51pm
Location: Near Alton Towers
Outfit: Bailey Burgundy S7 H
View Profile
Reply
Quote
|
Joined: 23/2/2006 Diamond Member 
Forum Posts: 3042
| Site Reviews Total: | 11 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 3  |
| Site Reviews 2021: | 1 |
| Site Reviews 2020: | 2 |
| Site Reviews 2019: | 1 |
| Site Reviews 2018: | 1 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 11 |
| Site Nights 2021: | 5 |
| Site Nights 2020: | 9 |
| Site Nights 2019: | 8 |
| Site Nights 2018: | 1 |
|
I have a Bailey Series 7 and had to remove all the cupboards around the front nearside corner to repair the damage caused on the inside from the awning rail. As said you will come upon screws that cannot be accessed from inside, these have to be carefully cut with a hacksaw blade or multitool. Other fixings are numerous and difficult to get at but it can be done.
However, that being said, although you have damp, it may not have been there long enough to have rotted the internal timbers or ply? I had this too so the first job is to remove all three windows from their rail. Take the bottom screws out of both stays and lift each window up a bit higher than level, it will then come out of the hinge assembly, put it away safely.
With all three out you will see the fixing screws holding the rail on, remove them. With a suitable thin tool very carefully prise the rail away from the body. Use white spirit to help soften the sealant gunge and don't bend the rail of scratch the bodywork. When off, clean the gunge with white spirit, then again with meths to remove the white residue it will leave. You can now see if there are small hairline stress cracks from the screw holes, that's what usually cause the water ingress. A very small hole drilled at the very end of each one will stop them propogating even longer. I sealed mine with a thinnish layer of clear Plumber's Gold sealant and let it cure.
Reseal the hinge with a suitable mastic or liquid sealand and carefully reassemble it back again.
A tip with screws through mastic, it will stick to the screw thread and pull a big knob of it away and degrade the sealing job. After applying mastic on the item to be sealed, cut a small hole in the mastic around each and every screw hole leaving a gap of 2-3mm between the screw and the edge of the mastic, this will stop it adhering to the screw as you tighten it and keep the integrity of the mastic intact. Place some liquid sealant on the thread of each screw beforehand to waterproof the holes.
Good luck, Dave.
-------------
Give a man a fish and he will eat for a day,
Teach a man to fish and you can get rid of him for a whole weekend.
|
|
|
9661 Visitors online !
Free UKCampsite.co.uk Window Sticker - Recommend to Friend - Add a Missing Campsite
[Message Forums]
[Caravan Sites & Camping]
[Company Listings]
[Features / Advice]
[Virtual Brochure]
[Shop!]
[Reception]
[Competitions]
[Caravans & Motorhomes For Sale]
[Event Diary]
[Contact Us]
[Tent Reviews]
Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2024 |
Advertisement
|
|
|
via mobile 27/3/2024 at 10:56am
