Joined: 02/12/2003 Diamond Member 
Forum Posts: 4373
| Site Reviews Total: | 0 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
All depends on the charger you have fitted, in general, from the early 90's most 'chargers' are in fact '12v power sources' with an output of a stable 13.8v at around 10amps and above on tap, this is quite capable of running the van without a battery at all.
Before this time and with few exceptions, again the output would be a maximum of 13.8v if your luckily! but the amperage available was much lower and in the order of 4amp. Further, the output is not particularly stable and relies on a battery to 'smooth' it, this then is of no real use to 'run' the van without a battery, but, could/can be used for minimal purposes without harm.
|
Topic: battery charger
