Joined: 30/6/2002 Diamond Member
Forum Posts: 23517
Site Reviews Total: | 1 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
from garys post
That's probably because the Fanmaster is on the back of an early (95) 3000S and has a 'thermal fuse' instead, however the finger of plastic that would press a reset button is still there but not cut out so will not move. I tell people its over the back of the fire, 9ins down and 7ins back from the top left hand corner of the fire, starting from where the fire front touches the woodwork.
If yours is fused and it's blown then the solution is a reset upgrade kit, you can get these from me
-------------
------------- the only silly question is the one you do not ask.
|