Joined: 30/6/2002 Diamond Member 
Forum Posts: 23517
Site Reviews Total: | 1 |
|
Site Reviews 2025: | 0 |
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
|
Site Nights 2025: | 0 |
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
|
from metz post
, it's a straight forward job, make sure the power supply is isolated, open up the star shaped pressing aroun the element, remove the locking nuts that secure the element, make sure when you remove it that you get the rubber seal out, refit in reverse making sure you get the rubber seal in the correct position (always use the new one provided), This is the important bit DO NOT OVERTIGHTEN the lock nuts, to tight and you will snap of the captive bolt, (you don't want to be doing that), remake the electrical connections and test.
------------- the only silly question is the one you do not ask.
|