Advertisement
Message Forums |
|
Topic: Installing an oven
|
|
08/3/2012 at 4:59pm
Location: West Midlands Outfit: None Entered
View Profile
Reply
Quote
|
Joined: 31/1/2012 Standard Member
Forum Posts: 56
Site Reviews Total: | 0 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
Hi,
I would like to install an oven in my 1990 Sprite Alpine. The space for the oven is there in the form of a large cupboard underneath the two ring burner and grille. I have bought a second hand oven from a guy who was breaking a couple of vans, it's an Optimus 6020 and it looks very similar to the Rose oven I had in my Bailey, It even has Edward Rose on the back of it.
The reason I want an oven is I used the oven alot in my first van and I think I will miss it if I don't fit one.
Anyway, My question is, Do I need a vent at the rear of the oven to the outside ? I remember my Bailey had one in the back panel as the kitchen area was at the back but in my Sprite it's down the side. I have seen some vans fitted with an oven and no vent to the outside.
I really would like to avoid cutting a hole but If I do need one I guess I'll have to get the cutting tools out. Could I get away with lining the inside of the cupboard with some sheet steel ?
The Oven I've got looks like it might have been a free standing one looking at the brackets on it and it has an outer casing which is painted/coated. I've lifted the top off and it's insulated between the outer casing and the inner wall of the oven.
Any advice much appreciated.
Matt.
|
08/3/2012 at 9:42pm
Location: Lanarkshire Outfit: Compass Lynx 340 2
View Profile
Reply
Quote
|
Joined: 26/5/2005 Diamond Member
Forum Posts: 1549
Site Reviews Total: | 3 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
Quote: Originally posted by CortinaMatt on 08/3/2012
Hi,
I would like to install an oven in my 1990 Sprite Alpine. The space for the oven is there in the form of a large cupboard underneath the two ring burner and grille. I have bought a second hand oven from a guy who was breaking a couple of vans, it's an Optimus 6020 and it looks very similar to the Rose oven I had in my Bailey, It even has Edward Rose on the back of it.
The reason I want an oven is I used the oven alot in my first van and I think I will miss it if I don't fit one.
Anyway, My question is, Do I need a vent at the rear of the oven to the outside ? I remember my Bailey had one in the back panel as the kitchen area was at the back but in my Sprite it's down the side. I have seen some vans fitted with an oven and no vent to the outside.
I really would like to avoid cutting a hole but If I do need one I guess I'll have to get the cutting tools out. Could I get away with lining the inside of the cupboard with some sheet steel ?
The Oven I've got looks like it might have been a free standing one looking at the brackets on it and it has an outer casing which is painted/coated. I've lifted the top off and it's insulated between the outer casing and the inner wall of the oven.
Any advice much appreciated.
Matt.
Hi Matt, your proposed oven may need a vent, but as suggested seek expert advice on this, regarding the steel sheet, I found that if you go to a plumbers merchants the have a fibre heat resistant board (looks similar to the old asbestos board) it is light and not that pricey, sorry cant remember what the board is called, the heat from oven will not transfer to any of the caravans wooden interior.
------------- If everything runs smoothly then I must have done something wrong
If in Doubt Check it Out.
John
|
09/3/2012 at 11:44am
Location: Milton Keynes Outfit: 2023Archway Woodford
View Profile
Reply
Quote
|
Joined: 30/8/2011 Diamond Member
Forum Posts: 2689
Site Reviews Total: | 0 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
Quote: Originally posted by jhsw on 08/3/2012
Quote: Originally posted by CortinaMatt on 08/3/2012
Hi, I would like to install an oven in my 1990 Sprite Alpine. The space for the oven is there in the form of a large cupboard underneath the two ring burner and grille. I have bought a second hand oven from a guy who was breaking a couple of vans, it's an Optimus 6020 and it looks very similar to the Rose oven I had in my Bailey, It even has Edward Rose on the back of it. The reason I want an oven is I used the oven alot in my first van and I think I will miss it if I don't fit one. Anyway, My question is, Do I need a vent at the rear of the oven to the outside ? I remember my Bailey had one in the back panel as the kitchen area was at the back but in my Sprite it's down the side. I have seen some vans fitted with an oven and no vent to the outside. I really would like to avoid cutting a hole but If I do need one I guess I'll have to get the cutting tools out. Could I get away with lining the inside of the cupboard with some sheet steel ? The Oven I've got looks like it might have been a free standing one looking at the brackets on it and it has an outer casing which is painted/coated. I've lifted the top off and it's insulated between the outer casing and the inner wall of the oven. Any advice much appreciated. Matt.
<P style="MARGIN: 0cm 0cm 0pt" class=MsoNormal><SPAN lang=EN-GB><FONT face="Times New Roman">Hi Matt, your proposed oven may need a vent, but as suggested seek expert advice on this, regarding the steel sheet, I found that if you go to a plumbers merchants the have a fibre heat resistant board (looks similar to the old asbestos board) it is light and not that pricey, sorry cant remember what the board is called, the heat from oven will not transfer to any of the caravans wooden interior. <SPAN style="mso-spacerun: yes"> </SPAN></SPAN>
The board you are thinking of is called MASTERBOARD
|
09/3/2012 at 8:11pm
Location: Nottingham Outfit: Motorhome
View Profile
Reply
Quote
|
Joined: 30/8/2007 Diamond Member
Forum Posts: 2809
Site Reviews Total: | 10 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
My first M/home had a Rose oven,with No outside vent,and I have fitted a new Smev oven in a new M/Home,and no vent is needed for it,as it is totaly sealed all round.and the heat comes out the front top grill just like my Rose oven did.
this is our old van with the Rose oven in,you can see the fridge vents,the oven was right at side of the Hab door,and as you can see there are No vents.
Post last edited on 09/03/2012 20:18:21
------------- Think this year is to follow old meet friends for 2014.
If you cant do someone a good turn,don`t do them a bad one,its nice to be nice you know,and little things mean much more later in life.
Pete.
|
10/3/2012 at 11:52am
Location: Outfit:
View Profile
Reply
Quote
|
Joined: 29/8/2011 Gold Member
Forum Posts: 426
Site Reviews Total: | 0 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
I never got on with the halogen oven, much prefer my gas one.
You should be able to tell from looking at it, weather or not it needs a vent, but my advice would be to put one in, as most caravan ovens have one (motorhomes don't though, for some reason).
Usually the vent is just behind the grill. I think it's more meant for those unlikely times when you'll have both on together.
They're not that difficult to fit, but they shouldn't really be fitted with flexible rubber gas hose, they should ideally be fitted with rigid copper gas pipe (as hose needs changing, & hose is usually for free standing, portable appliances).
Personally I would get on & fit it myself, but I'm pretty competent & confident with these things. I would also give it it's own isolation valve, placed somewhere where you can get to it (like in the cupboard under the sink, or wherever your other valves are, best keep them all together). I think this is a necessary requirement with gas appliances in caravans.
------------- Matt.
|
|
|
9752 Visitors online !
Free UKCampsite.co.uk Window Sticker - Recommend to Friend - Add a Missing Campsite
[Message Forums]
[Caravan Sites & Camping]
[Company Listings]
[Features / Advice]
[Virtual Brochure]
[Shop!]
[Reception]
[Competitions]
[Caravans & Motorhomes For Sale]
[Event Diary]
[Contact Us]
[Tent Reviews]
Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2024
|
Advertisement
|
|
|