Joined: 02/12/2003 Diamond Member 
Forum Posts: 4373
| Site Reviews Total: | 0 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
You have no need to touch the gas supply apart from making sure the bottle is turned off.
Outside, remove plastic flue cover and flat alloy plate beneath.
Bottom right corner you will find two cross head pozidrive screws, you will need to get right down to see them?!
Unscrew these and the module slides out, if it seems jammed, the black box lid inside as popped open. Go inside and above where the gas pipe connects you will find a finger of plastic leading the wires outside, squeeze this shut and start it through the slot. Go back outside and it will then slide out and you can disconnect the plug, job done.
However, the alloy plate has some writing on it, if you have any doubts, please heed what it says?!
|
Topic: heater removal
