On a couple of my blind/flyscreen's the bracket at the base of the vertical runner is hanging down as the screw has pulled out from its hole.
The wood is not damp or soft but I am struggling to screw in a wider screw because there isn't the space in the bracket and the slightly wider ones I have used have all pulled out.
Any advise would be graetly appreciated as this is one of those niggles that I would love to sort.
A common problem. A plastic wall plug or rawl plug with a little glue or similar pushed into the hole and left to harden before refitting screw should do the trick. B & Q if you don't have plugs.