Hi guys I'm changing the water pump to a reich 19l /m pump from a whale pump on my bailey caravan to get some more water pressure but my question is the pump is too big to fit into my aqua roll so has anyone hot any ideas of what I could do or where I can source some parts? I'm going to connect a few rolls together as I know it will sup water but first obstacle is how to get the pump in?
Thanks
Btw I need a 80mm opening got the pump to fit and the opening is only about 62mm on the aquaroll
Quote: Originally posted by Whittouk on 14/6/2015
Hi guys I'm changing the water pump to a reich 19l /m pump from a whale pump on my bailey caravan to get some more water pressure but my question is the pump is too big to fit into my aqua roll so has anyone hot any ideas of what I could do or where I can source some parts? I'm going to connect a few rolls together as I know it will sup water but first obstacle is how to get the pump in?
Thanks
Btw I need a 80mm opening got the pump to fit and the opening is only about 62mm on the aquaroll
You must have a pre 1992 Aquaroll as since then they have been 80mm.
Not sure of the age of the aqua roll,however my next question is how could I join a few aqua rolls together as I'm thinking it may suck it dry rather quick!
I joined two aqua- rolls by fitting plastic cock in one cap on one roll and other cap with mains kit/float valve.
one roll was stood up right with pump and Aqua-roll mains connection kit in side cap second roll sat on "A" frame 4ft away with caps towards bottom then cock and float valve connected with length of 1/2" hose, filling just keep filling one on a frame.
cock has to be short or right angled to miss towing handle when rolling for refilling one on "A" frame.
Or swop cap from one roll to other ie cap open for pump can be used to seal roll on "A" frame for filling.