Is it safe to unscrew the locking handle to replace with a new one as the covering on the exsisting ones plastic handle has broken. Off. Still works but have to use a cloth when tightening an loosening .
Just had the same problem on mine. New handle was about £7 direct from the Al-Ko website.
The old one was quite difficult to remove because the end of the thread seemed to be damaged.
Once out the new one simply screwed straight into place.
Daves1
------------- its easy enough to be pleasant when the world rolls along like a song.but a man is worth while if he can smile when every thing goes f------ wrong.
Quote: Originally posted by DaveS1 on 22/8/2015
Just had the same problem on mine. New handle was about £7 direct from the Al-Ko website.
The old one was quite difficult to remove because the end of the thread seemed to be damaged.
Once out the new one simply screwed straight into place.
Daves1
They flatten the end to stop it falling out if it ever unwinds itself, and they do, I know!
It can be easier to wind it in and cut the last 10mm off or grind it down with a dremel or similar.