|
 Topic: Lunar Clubman 13amp sockets
|
  |
03/7/2016 at 7:36pm
Location: Stockton on Tees
Outfit: Lunar Clubman SB Kia Sorento
View Profile
Reply
Quote
|
Joined: 12/1/2007 Platinum Member 
Forum Posts: 1278
| Site Reviews Total: | 28 |
|
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 3 |
| Site Reviews 2019: | 7 |
|
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 17 |
| Site Nights 2019: | 15 |
|
I would like to check wiring on my 13amp sockets(2011Clubman SB).
There are no screws to undo to release the sockets, should I try to prise them off?
Also, I can see behind the sockets below the seats and the wiring appears to be encased inside a plastic "cap" like the top of an aerosol.
There dont appear to be any screws to access this either.
If you have a Lunar please have a look at yours and see what you think.
Thanks
John.
|
03/7/2016 at 8:31pm
Location: Cheshire
Outfit: Compass Connoiseur 490 5 + Volvo V70
View Profile
Reply
Quote
|
Joined: 15/3/2007 Platinum Member
Forum Posts: 543
| Site Reviews Total: | 2 |
|
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
|
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
|
I've a Compass caravan so maybe different, but my 13amp sockets have two screw covers, (just look like little circles) they can be carefully prised off so the screw heads can be seen.
|
03/7/2016 at 8:32pm
Location: South Wales
Outfit: None Entered
View Profile
Reply
Quote
|
Joined: 18/6/2014 Silver Member 
Forum Posts: 145
| Site Reviews Total: | 0 |
|
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
|
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
|
If they are the sockets I'm thinking of, the front had a surround that is clipped on, the screws are then behind that. As for the back of the sockets the round piece is again clipped in place.
|
03/7/2016 at 8:52pm
Location: Stockton on Tees
Outfit: Lunar Clubman SB Kia Sorento
View Profile
Reply
Quote
|
Joined: 12/1/2007 Platinum Member
Forum Posts: 1278
| Site Reviews Total: | 28 |
|
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 3 |
| Site Reviews 2019: | 7 |
|
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 17 |
| Site Nights 2019: | 15 |
|
Thanks sevenexile, just been out with a knife and managed to remove the surround, will try the backs tomorrow.
|
|
