Hi folks. Got new plastic insert for between the rubbers if the caravan window. Any tips for installing the plastic strip? I don't have the special tool.😞
When you do it try to compress the joint as much as you can i.e. cut it over length as it will shrink and leave a gap if you don't of that you can be certain, and use plenty of lubricant to avoid stretching it when fitting.
Thanks for all the advice folks. I tried washing up liquid but it makes such a mess. Maybe I was using too much. The rubber is really tough to lift up on the opposite side with insert fitted. Am i doing something wrong?
I have found that if u use one of the aluminium beer bottle openers it does help lift it up but it's a slow job.
Old plastic nectar card to lift the rubber slightly to help the trim seat itself, Afer about 12feet though the card may break. Mine did. I just trimmed it down and carried on.
Thanks folks for all your wisdom, experience and patience. I have finally finished the installation of the insert and windows. 👍😀👍😀. Next job on the list get some blinds up. I will open a separate issue on this. I am nearing ready for our first outing in the van after some serious rebuilding following heavy damp and rot find.
A big thank you to all for all your individual inputs to get me to this point.😁👍👍👍👍