As well is two words!
How does a sage know everything about everything? or does he? or does he just think he does?
Remember, if you buy something you bought it, not brought it.
I don't think that one will be powerful enough, I used a 14.4v drill that was ok but it seemed slow at times. I now have a 20v drill that came from Aldi with two battery packs, this works much better and I always have a spare battery handy.
Have a look at the offers in Argos, they are usually competitive and it's easier to return stuff if it becomes faulty. Something like a cordless drill is fairly heavy to post if you need to return it.
Please make sure that the drill you buy has a torque setting feature. There are 2 reasons for this:
-the steel winder threaded section passes through an alloy block that moves the leg. Without a torque limiter, the drill will be forced to a sudden stop at either end of its travel (especially if used on the high speed setting) and the force produced can split the alloy block - I have experienced this, and replacing the leg can be problematical as many have found.
-that sudden stop will force the drill to turn in the hand quite visciously-there is a risk of hand injury.
I use a 13.8 Dewalt purchased on a deal around 2004 it was overkill for the caravan but I do use it for DIY as well.I bought it because my previous cordless didn't have sufficient torque for the steadies, I think drills and batteries are much better now. I'd suggest getting one with 2 batteries recharge and alternate between the batteries.
People get obsessed with the voltage of the electric drills.
I have some 10.8v Bosch Blue drills which are more than capable of winding down the legs on our caravan.
A lot depends upon the quality of the motor and battery, and also the condition of the thread on the winder mechanism.
I would suggest that you pay a little more than B&D that you suggested and get a two speed one with a torque setting ring. In that way you can adjust the drill to a setting to avoid lifting the caravan too much when the leg touches the ground.
Certainly an excellent present for Christmas.
We use one. Most important feature to look for imho is a lithium battery. These don’t discharge like nicad batteries so can be left in your van for months and will still work.
As others have mentioned ALDI or Lidl well worth a look we paid £30 for ours a few years back and still works a treat. It also has a torque setting so you don’t twist your wrist when you hit the ground.
I bought a cheap 12 volt drill from Argos back in summer, and it seems to work fine. It has a torque setting and variable speed, so it does the trick. It's similar to this one;
It is a good idea to have a drill with torque limiter settings ... then when winding down you will put the same pressure on each leg.
I have had a socket sheer off the 'pole' ... rare, but make sure you get a decent one ... and one that's the right length ... there are some shorter ones about ...
Never had a socket shear off, but I cut the shaft part down on mine so its just nicely long enough for the rear steadies inside the tube. If the shaft is too long you can get a bit of a wobble on!
Buy him a aldi 20 volt drill, 2 batteries and they come in a nice box.
Plenty of power for the legs and the batteries last a long time, plus they have a 3 year warranty, I have both the 14v and the 20v and use them al the time at home.