We have a leaking housing on our truma crystal2 system which is now discontinued. It constantly runs water when we are on site, so we have to switch off the pump when we are not using water. Any advice on how to correct this, or does anyone know where we might get a replacement without changing the type of pump?
The good news is that I believe from reading a similar post on here a while ago that there is a way of modifying the later housing to fit your present set-up.
Perhaps you could do a 'search' of previous posts or that some kind person will be able to point you in the correct direction soon?
Dave.
------------- Give a man a fish and he will eat for a day,
Teach a man to fish and you can get rid of him for a whole weekend.
Is the water inlet housing the one with integrated water filter above the connection or not?
Where is the leak actually coming from, is it at the connection or a split in the housing?
If it's a split then the complete inlet will need replacing but if the leak is coming directly from the inlet it could either be the sealing ring that is worn or one of the swivel securing locks that has broke in which case either can be replaced quite cheaply. However, you need to reply to the questions otherwise no further help can be given.