Advertisement
Message Forums |
|
 via mobile 25/5/2023 at 8:51pm
Location: Callington Cornwall
Outfit: Bailey Olympus 620 6
View Profile
Reply
Quote
|
Joined: 23/5/2006 Standard Member
Forum Posts: 39
| Site Reviews Total: | 2 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 2  |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 11 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
Hi, if you have basic woodworking skills, then it is likely that you can fix yourselves. 50% isn't as bad as it sounds, but will get worse if you ignore it. May be a fixing screw (s) in the lower rail or on a corner that is the issue, or a seal on a locker, if nearby. Wall is typically an external skin of aluminum fixed to a wooden frame which has insulation between the timbers and then your internal decorative wallboard stapled/bonded to the frame and insulation.
You can cut a line with a multi tool or Stanley knife then prise off the rotten wallboard. Same applies to any rotten flooring (though this is normally two pieces of plywood sandwiching the insulation and wooden frame). Hopefully, very little of the insulation will come with it if you carefully prise it away. You need to check for any rotten frame timbers and cut out if necessary. Then allow everything to dry out and/or use a dehumidifier.
New frame pieces need to be fixed and glued in place then the new wallboard or plywood floor bonded onto timbers and insulation.
Biggest issue is likely getting a small enough piece of matching decorative wallboard.
To stop the water getting in, may need to remove all rail screws and the rail, then thoroughly clean off all the old sealant. Fix back on with plenty of good quality sealant (not silicone), covering all screw holes and ensuring the rail is sealed well. If removing corner screws clean off old sealant and insert new sealant before putting screws back in.
Hopefully this gives you some idea of what you're up against. Not that difficult, but can be quite time consuming, if benches, pipes, wires etc. are in the way.
-------------
Always keep the shiny side up...
|
|
|
8737 Visitors online !
Free UKCampsite.co.uk Window Sticker - Recommend to Friend - Add a Missing Campsite
[Message Forums]
[Caravan Sites & Camping]
[Company Listings]
[Features / Advice]
[Virtual Brochure]
[Shop!]
[Reception]
[Competitions]
[Caravans & Motorhomes For Sale]
[Event Diary]
[Contact Us]
[Tent Reviews]
Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2024 |
Advertisement
|
|
|
Topic: damp around edges
