Joined: 18/7/2009 Platinum Member 
Forum Posts: 816
| Site Reviews Total: | 7 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 1  |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 1 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 1 |
| Site Reviews 2018: | 1 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 7 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 14 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 14 |
| Site Nights 2018: | 1 |
|
CAZ H 48 are you talking about the sink and hob, if so it is fitted onto 2 metal hinged bars, pull the unit forward and down using the small handle above the cupboard doors when you get it to the floor it will be at an angle, you should have a small block of wood with a u shaped cut in it to fit under the unit by the entrance door and about an inch and a half to inches from the front of the lowered unit, after you have done that press down on the rear of the unit and it should level out, that is how our year 2000 carousel is done, if you have any problems ring gobur themselves they are very helpful
Post last edited on 29/01/2024 18:57:50
|
Topic: gobur carousel kitchen problem
