Message Forums

Hi there,

What make/brand is your current one?

Can you post a picture of the connector?

Three pins sounds unusual as there are only +ve and -ve leads.

Can you not use the old plug and fit it to the new water pump leads.

Is this a fitting that has been added by a previous owner?

There are some round 3 pin plugs/sockets that were used in radios

I've got a couple under the bench as I used to use them with 2 pins wired together for battery box connections.

Its difficult to say without a picture.

This is a range of pumps that Towsure do 

http://www.ukcampsite.co.uk/redirect.asp?redir=http://www.towsure.com/default.asp?t=6334

Is this the one ?  only has 2 pins though .
You can find it Here

atb

Wizard

Cant do pics at the mo camera is dead!...

just been and had a look....right on the van the water inlet is a round connection Two holes for pins and a indent for a circular projection, then the pump itself is a whale 881 (however, its has definatly had some work on the hoses)  at the other end that connects to the van, its just a round plug two pins and a round bit with a black washer on it, that pushes into the van...hope that makes more sense...if I buy a new pump can i connect my old round connector then?.....the newer ones have a square end dont they looks it bit like a white box...is it easy enough to take off and is the wiring the same then?

If I do buy a new pump do they come complete with the hoses the or do i have to buy all the bits? Ta for your help