Message Forums

no.10 in diagram.some are easy if you can get at it.

CARVER CASCADE MK2

Had the same problem.

Be careful removing the old valve. Mine broke off and left the thread in the heater :(

again sorry to keep on. but when i connect up my water, the pump runs till every thing is full, all water coming out cold taps, no air,switch off taps and pump stops. turn on hot tap and nothing happens. if i was now to remove the drain from the heater the water would stand out of it like it is under pressure,(pump is off) that would suggest to me that the water is getting into the heater fine but its not getting through to the hot water side of things does that still sound like a non return valve problem ?

doing my head in this lot.....

think that might be worth a try michael. think this van has stood for a while before we got it and a blockage sounds like a possibility. will give it a go tomorrow afternoon if i get finished work early enough.

thanks again for all your help.

fixed the bl##dy thing......

problem was some prat (dont think this site would like it if i put the word that i am really wanting to say in ) had fitted a non return valve in the hot water outlet !!!!!!!!!

i would like to thank michael for all your help and a big thank you to gary from arc systems for al the help..... i owe you big style mate. thanks again.

Ahh, phone call at twenty to nine tonight!...now Iv'e got you.. and theres me thinking two people had the same problem!!

So that's us three of us in the pub...and your paying!!!!!