Hi. I have just bought a Hi Gear Horizon 400. When I inflate the channels the ends blow up and don't inflate all the way along. The pressure therefore builds up and pops the pump out.
Am I missing something? I have tried to lay the channels as flat as possible but they kink up and the air wont pass along them.
Hoping to be camping tonight!!
Thank you
Don't forget to leave a review of all tents you've used, for a chance to win fantastic prizes
Check your pump. I had similar with a different tent and the problem was a small hole where the flexible tube joined the pump. It'd partially inflate then the pump would fly off the valve.
Don't forget to leave a review of all tents you've used, for a chance to win fantastic prizes
We have an Airgo Solus 4 and our way of doing things is to have one person inflating the beam and the other working from the opposite side helping the beams to the upright position as they inflate.
This has worked for us over the past 4 years.
I agree a twist sounds likely. Might be a good idea to confirm that or otherwise as could affect the structural integrity and make itself known on a windy night. Good luck!