Message Forums

Quote: Originally posted by simon23 on 04/4/2009

---

is it a blade fuse or a cartridge fuse?

---

Can you get at the pump? if you can lift it out ( on the bench type loo you lift the toilet roll holder out, don't know about the other models ) and just turn the rotor a little. It is not uncommon for them to sieze over the winter and stop working, when you have done this you will need to replace the fuse again as by trying it you will have already blown the fuse.

hi ther i had same problem with mine, If you look in front of the fuse holder there is a small plug with two wires coming out of it, I found that this had worked loose, Just pushed it back in and hey presto it was problem solved. Hope this works for you. Dont go changinging pumps or anything else just yet, chaec all terminations first.

Good luck.

Was there any water left in over the winter as it could have frozen and caused damage to the pump.Ours is a push type pump and had cracked around its base so  borrowed so araldite from the site owner and its still going strong after three years.

Andy