Joined: 29/10/2005 Diamond Member 
Forum Posts: 4485
| Site Reviews Total: | 0 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
I think as previously said that the most likely cause is volt drop on the 12V cables,300W will pull 25A,you would need at least 4mm cable to cope with that load allowing for the inefficiency of the inverter,even then a run of 15 feet will drop the volts down to less than 11v.
Saxo1
|
Topic: Inverter to power GHD straightners
