Home

   Log in or Register



Insurance Quotes
forums Campsite Search Comp Directory tips virtual brochure Profile
Tent and Awning Reviews Competitions Caravans and Motorhomes For Sale Shopping Diary Advent Calendar

Advertisement

Message Forums
Welcome Guest Register Login Search The Forum Posts Since Last Visit
 Reception - All Forums
  Camping and Caravanning Equipment 		Share   Post on X / Twitter  Share on Facebook  Email  Printer Friendly Version Print
Subject Topic: calor gas cylinders hoses and connections Post Reply Post New Topic
Personboyan
15/6/2012 at 12:05am
 Location: London (sometimes Belgrade)
 Outfit: 5m Bell Tent & a Hypercamp Eldorado View boyan's Profile View Profile   Reply to boyan Reply   Quote boyan Quote  
Joined: 28/5/2011

Standard Member
Standard Member

Forum Posts:   10
Tent Reviews:   1
Site Reviews Total: 0
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0
Hi all... any advice on this will be most sincerely appreciated. :-)

First of all - am I right in assuming that the gas pressure from a 4.5 butane cylinder and a 7kg butane cylinder (or is it 6kg?) is the same? I.e. would I be able to run the same appliances from either cylinder?

I have three gas appliances and take one 7kg cylinder which is shared among them as and when, but I'd quite like to take two smaller cylinders instead (especially as I have no clue as to how much gas is left in the bottle, so if it runs out...)

2. Connections. Can I use this? It states "for LPG only", but butane is a type of LPG, right? (That's what it says on the net). If not, I'd be grateful for some other options where I don't have mess around pulling hoses off etc.

Any other tips on connections etc. which make life easier, are welcome!

Cheers

Post last edited on 15/06/2012 00:12:02


PersonHacksaw Bob
15/6/2012 at 12:17am
 Location: West Midlands
 Outfit: Various tents View Hacksaw Bob's Profile View Profile   Reply to Hacksaw Bob Reply   Quote Hacksaw Bob Quote  
Joined: 26/7/2009

Diamond Member
Diamond Member

Forum Posts:   6502
Tent Reviews:   1
Site Reviews Total: 10
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0
The pressure supplied by the regulator should be the same (28mb in the case of butane) irrespective of the cylinder size, but if you're currently using a clip-on regulator on a 7kg Calor cylinder you'll need a screw-on one instead for the 4.5kg one.

Link isn't working, but yes, you could use a quick-release coupling.

To check how much gas is left in your cylinder, weighing the bottle and subtracting the tare weight (marked on the collar in pounds and ounces - just to complicate matters!) will give you the weight of the remaining gas.



Post last edited on 15/06/2012 00:23:54


Personold chap
15/6/2012 at 5:32am
 Location: Sitingbourne
 Outfit: baily champaign View old chap's Profile View Profile   Reply to old chap Reply   Quote old chap Quote  
Joined: 19/2/2006

Platinum Member
Platinum Member

Forum Posts:   1098
Site Reviews Total: 1
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0
yes you could use these but you need 1 for each appliance gas pipe unless you are contemplating removing the fitting from gas pipe of each appliance in order to fit it to another? I really do not see any advantage.I would imagine that each appliance you have is fitted with a gas hose & a suitable regulator.The coupling you mention would allow you to use 1 regulator but you would need to fit a coupling to each appliance hose in place of the regulator already fitted.
price wise it is dearer than a suitable regulator IF your appliances do NOT have them all ready fitted


Personboyan
15/6/2012 at 2:03pm
 Location: London (sometimes Belgrade)
 Outfit: 5m Bell Tent & a Hypercamp Eldorado View boyan's Profile View Profile   Reply to boyan Reply   Quote boyan Quote  
Joined: 28/5/2011

Standard Member
Standard Member

Forum Posts:   10
Tent Reviews:   1
Site Reviews Total: 0
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0
thanks for the advice, all taken on board and order placed.

old chap, on the 4.5kg cylinders, the hose has to be pulled off the regulator which can be tricky. also, the coupling attached to each appliance will solve the problem of different regulators on different sized gas cylinders.


PersonOld Grey
15/6/2012 at 2:49pm
 Location: Essex
 Outfit: Montana 6 + Awning View Old Grey's Profile View Profile   Reply to Old Grey Reply   Quote Old Grey Quote  
Joined: 01/7/2011

Gold Member
Gold Member

Forum Posts:   381
Tent Reviews:   1
Site Reviews Total: 2
Site Reviews 2024: 0  
Site Reviews 2023: 0  
Site Reviews 2022: 0  
Site Reviews 2021: 0  
Site Reviews 2020: 0  
Site Reviews 2019: 0  
Site Reviews 2018: 0  
Site Nights 2024: 0
Site Nights 2023: 0
Site Nights 2022: 0
Site Nights 2021: 0
Site Nights 2020: 0
Site Nights 2019: 0
Site Nights 2018: 0

We use the 7kg Calor and each cooker has its own gas pipe and regulator . Luckily the 7kg uses a clip on regulator that can be changed in seconds with the turn of a switch.

To kudge what left weigh the cylinder on a bathroom scale, subtract the tare weight ( silver circular collar on the cylinder neck is stamped with this weight) and what you have left is the gas remaining .

Only roughly your cylinder empty weighs  9kg your cylinder on the scale is 12kg so it must have about 3kg gas or under half full .



In order to post a reply you will need to register, or if already registered please log in here

Prev       Next
Quick Links - All Forums - Camping and Caravanning Equipment - Top of Page

Printer Friendly Version Printable version      Share   Post on X / Twitter  Share on Facebook  Email


Latest News, Discounts and Competitions  see all...

7135 Visitors online !

Free UKCampsite.co.uk Window Sticker  -  Recommend to Friend  -  Add a Missing Campsite

[Message Forums]  [Caravan Sites & Camping]  [Company Listings]  [Features / Advice]  [Virtual Brochure]  [Shop!]
[Reception]  [Competitions]  [Caravans & Motorhomes For Sale]  [Event Diary]  [Contact Us]  [Tent Reviews] 



Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2024


Advertisement
Advertisement


UKCampsite.co.uk
2024 Advent Calendar

Advent Calendar

24 Daily Prizes PLUS a Christmas Day Star Prize worth £999

Request a Reminder