Joined: 30/4/2012 Standard Member
Forum Posts: 13
| Site Reviews Total: | 0 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
We have a 1991 Fleetwood Garland caravan that we purchased earlier this year which has a Carver Cascade 2 water heater. We haven't used the water heater since purchasing the caravan as the previous owner said that it wasn't working but didn't explain why.
I hooked the caravan up to the electricity this morning along with the water/pump, ran both taps until the water was flowing freely and then switched the isolation switch on (illuminated light came on the switch) followed by the slide switch. The green light came on but was soon followed by the red. After a short while the water immersion/tank became warm and is now hot, but the water is still cold when I turn the tap on!
We will only be using the water heater through the electricity option as we've removed all of the gas from the caravan and would be most grateful for any advice on what I can possibly look at/replace and if it should still work using electricity only.
Many thanks,
Mark
|
Topic: Carver Cascade 2 Water Heater
