Joined: 30/7/2006 Silver Member 
Forum Posts: 100
| Site Reviews Total: | 0 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
Hi, The first time we used ours all the beams inflated but after I had turned the valves off inside in order to isolate each beam, two of the beams started to deflate very slowly.After informing the shop and acting on their instruction I removed the outer cover sleeve on the beam to find a tiny hole in the actual clear plastic beam. I repaired it with an air bed repair patch super glued on. That seams to have done the trick. I have been given two replacement tubes by the shop we purchased it from just in case. Which model have you got?
Ours is the Vermont 7sa.
|
Topic: Outwell Air collection
