I have a mikomi Tv which runs off 230v and works fine,
Until I try it on 12v I have a 10amp socket 2 pin 12v, which I have bought a plug for it then converts to 4pin plug which should feed the TV, the Tv leds doesn't light up showing it doesn't have any power, have I missed something?
I know it sounds daft but have you got a leisure battery connected up and fully charged?
A Television consumes quite a bit of power so there needs to be adequate power in the battery.
There may be a secondary switch as sometimes the 12 volt socket may be connected up to the auxiliary or main light switch etc.
Yes I have 12v socket which I have plugged a 2 pin 12v plug in, on the other end there's a 4 pin plug which plugs into Tv, but my Tv doesn't work on 12v but does on 230v
Quote: Originally posted by Batesy81 on 18/4/2017
... 4 pin plug which plugs into Tv, but my Tv doesn't work on 12v but does on 230v
Just been trying to read the destructions online.
The TV obviously has some odd bespoke 4 pin connection for the supply. As you (presumably) have a working mains adapter to run the TV from 230v, I'd suggest you use a multimeter to compare the working output of this, (polarity, which pins etc.,) and check against the dedicated 12v cable you're trying to use. Some of these adapters aren't great and you may have either a duff connection between the two adapters, or the wrong output at the 4 pin fitting.
Interestingly too, the manual states the TV has a standard DC input connection, which confuses things a bit.
Copy of manual online here.