Joined: 17/12/2013 Standard Member
Forum Posts: 18
| Site Reviews Total: | 0 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
The manual states that it can be lit with a match through a 'opening in the backside'. Not sure where that is!!
Burner ignition
• Open the gas bottle valve. Make sure that the thermostat for 230-V operation is in
“0”-position and that the plug (battery) is not connected. Turn the gas knob to max.
(big flame) and keep pressed for 10 seconds to displace any air out of the gas line.
• As the gas knob is pushed in, press the ignition button several times if required until
the flame is burning, wait 15 seconds and then release the gas knob.
In case the flame does not ignite, repeat the ignition process. The device is equipped
with a flame protection. When the flame expires, the gas supply
cuts off.
In case it is not possible to ignite with the spark generator because of high
humidity, the gas burner can be ignited with a match through the opening in
the backside. To switch off the gas operation always close
the bottle valve first and then turn the gas handle to “0”-position.
|
Topic: Waeco CAB 40 Fridge pilot light
