Joined: 14/4/2012 Standard Member
Forum Posts: 13
| Site Reviews Total: | 6 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 6  |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 6 |
|
Thanks Ted. I take it that it's upright so the inner fixing plate is 35mm wide? Height is no problem, it's the left hand edge of the inner fixing plate (seen from the inside) which may catch the fridge edge.
Just measured the gap and from the inside rubber seal edge to the fridge and it's 42mm. The outside trim extends from the door but not enough to foul the outer hinge unless the outer hinge casing is a lot wider and hence moving the exterior fixing holes further from the door.
It's tight but ok. My only concern is the proximity of the holes to the door hole edge and hence some weakness there. Think I'm being a bit over cautious.
|
Topic: FIAMMA SECURITY 46 door handle size
