Joined: 21/6/2004 Platinum Member 
Forum Posts: 1497
| Site Reviews Total: | 6 |
|
| Site Reviews 2024: | 1  |
| Site Reviews 2023: | 0  |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 15 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
not a very clear question , but , if i assume you are wanting to wire in , some sort of warning devise , to tell you when the pump is running. then , yes , ive done this , but using a buzzer and not a warning light, but the connections would be the same , weather using a light or a buzzer.
just wire the warning light (or the buzzer) straight across the connections that go directly to the pump, then whenever the pump runs the warning light ( or buzzer) will operate . just make sure the warning light (or buzzer ) is 12v
-------------
I predict a riot !!
|
Topic: Whale water pressure switch wu7207
via mobile 30/3/2024 at 10:30am
