Home Log in or Register

Message Forums

Welcome Guest

Reception - All Forums

Caravans and Caravanning

Topic: Carver water heater query

Page: 1 2

steve2009

21/6/2011 at 10:28pm
Location: Dunstable Beds
Outfit: Elddis Shamal XL

View Profile

Quote

Joined: 16/5/2009

Standard Member

Forum Posts: 67

Site Reviews Total:	5

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

Well as far as I'm aware I have, the EHU is plugged into domestic mains and whilst battery is pretty much dead it is still connected. With mains connected the volt meter is on 13v, lights, fridge & water pump operate ok. The immersion heater light comes on (which I know does not necessarily mean it's working) but as there's no HW and no sound or heat from the heater after 45 mins then I guess it means something is not working as regards the IH.

Please let me know if there's something I've not done right as we're going on our first weekend away on Friday - it would be nice to have HW although not a necessity!

steve2009

22/6/2011 at 9:42pm
Location: Dunstable Beds
Outfit: Elddis Shamal XL

View Profile

Quote

Joined: 16/5/2009

Standard Member

Forum Posts: 67

Site Reviews Total:	5

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

Almost ready to go away for the weekend now....

Anyone got any last minute advise on my water heater issue please?

Ideally I'd like to find out if I can test the element and if necessary how much they cost to replace. Not sure if they're user serviceable either.
Or have I missed anything more fundamental, I don't think it's anything to do with the 12v system as the Carver manual states mains electric so I think I'm ok there...

Discounted Insurance Quotes for UKCampsite.co.uk visitors! Up to 12.5% off!

UKCampsite.co.uk users are rewarded with up to 12.5% off Caravan Guard touring caravan insurance, folding camper and trailer tent insurance, and 5% off motorhome and campervan insurance. Static caravan insurance is also available. Get an online quote now

arc systems

22/6/2011 at 10:47pm
Location: None Entered
Outfit: http: www.arcsystems.biz

View Profile

Quote

Joined: 02/12/2003

Diamond Member

Forum Posts: 4373

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

You have removed the cover and checked the wiring, so you have seen the two thermostats, the top one with the reset button, each one of these has two connections.
Between the two stats you have the two connections for the element.

FIRST REMOVE 240v POWER BY REMOVING HOOKUP CABLE FROM VAN

Now with your multimeter set to OHMS on the 200 range, first check the resistance between the pair of connection on each stat, the reading you want is the same as touching the multimeters probes together, ie, no resistance.
If you don't get a reading then that stat is 'off' and faulty

Now check the resistance between the element pins, for a 5A fused element you want circa 64ohms, for the 3A fused element you should get around 85ohms

No reading here and the element is U/S, replacement for these are like hens teeth, I've got new stats though

karljones6

10/7/2011 at 7:26pm
Location: wales
Outfit: colchester

View Profile

Quote

Joined: 30/6/2011

Standard Member

Forum Posts: 2

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

Hi my cascade2 burner wont light , when i switch the power on the green light comes on and stays on but no ignition on the burner, if i flick the switch back and to the yellow light flickers (just thought i would mention ) iv tested the wires from both ends of the 6 pin plug and are all in tacked , i have put a live feed to the burner module circuit board and the gas vale and igniter both kick in, iv tested the on/off switch and working fine, iv tested for live feeds at end off din cable there is 2 constant lives when switched on, but now i don't know what else to do if i new if or which diode, capacitor had gone i could change it please can you help its driving me mad, i don't mind paying for info or possible repair

regards Karl

tim kinley

30/4/2013 at 7:25pm
Location: douglas isle of man
Outfit: fiat ducato swift kontiki

View Profile

Quote

Joined: 30/4/2013

Standard Member

Forum Posts: 4

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

i also have a problem i have a 1989 fiat ducato swift kontiki and it has a carver cascade 2 water heater. i have recently had a gas check on the whole van and it was all ok but i dont want to take it back to the fella as he charged silly money £300 plus to put some other things in the van right. anyway i was camping and i had hadwater the wind got up to gale force so i decided to pack up and move on. next time i tryed my hot water the green light came on then the red light about 30 seconds later but it failed to light and i could not hear and clicking. so i tryed it again and the red light and green light came on straight away so i though oh well and left it then the following week i tryed it again and just the green light now comes on but no clicking no hot water and the tank is cold even after 1 hour. i have no gas leaks the van is level and the gas bottle is full and turned on and my cooker has a good flame. my hot water taps are running with no sign of air in the flow. any ideas what it could be please.

-------------
I love camping...........

tim kinley

30/4/2013 at 7:25pm
Location: douglas isle of man
Outfit: fiat ducato swift kontiki

View Profile

Quote

Joined: 30/4/2013

Standard Member

Forum Posts: 4

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

-------------
I love camping...........

arc systems

02/5/2013 at 12:50am
Location: None Entered
Outfit: http: www.arcsystems.biz

View Profile

Quote

Joined: 02/12/2003

Diamond Member

Forum Posts: 4373

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

The wind might be a clue if it was driving rain at the heater side of the van?

This can force water behind the flue cover and if water gets onto the wires from the gas valve, this can lead the water inside and onto the electronics!

Best way to check is to remove the 'gas burner module' but without removal, by opening the black box under the water tank inside, the use of a hair dryer can sometimes get it working?

stephenn280575

02/5/2013 at 4:24am
Location: Skipton
Outfit: Coachman Wanderer & Audi A6 allroad

View Profile

Quote

Joined: 04/5/2008

Gold Member

Forum Posts: 274

Site Reviews Total:	3

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

tim kinley

02/5/2013 at 8:34am
Location: douglas isle of man
Outfit: fiat ducato swift kontiki

View Profile

Quote

Joined: 30/4/2013

Standard Member

Forum Posts: 4

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

Hi Arc there was no rain but penty of wind which i find a little strange. any other ideas. My owner manual says green indicator light on only and heater cold and will not operate means temprerarure control faulty. but this may as well be japanesse. does these mean that a thermostate is faulty? and if so is it part of the burner? and if so is it a part that i could fit or do i need to get the campervan gas fitter to do it. ie is it more or less a plug and play

-------------
I love camping...........

tim kinley

03/5/2013 at 5:08pm
Location: douglas isle of man
Outfit: fiat ducato swift kontiki

View Profile

Quote

Joined: 30/4/2013

Standard Member

Forum Posts: 4

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

I've taken the cowl off the outside today and it all looks ok I traced the control box cable and its connected is there a reset button or anything else I could try

-------------
I love camping...........

AndrewRoyston84

11/6/2017 at 6:04pm
Location: None Entered
Outfit: None Entered

View Profile

Quote

Joined: 11/6/2017

Standard Member

Forum Posts: 1

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

I'm hoping someone can help.
I've a carver cascade 2 and I'm able to get cold water but hot water tap won't give anything it makes the pump come on but I believe there is no water going into heater tank I've replace the inlet valve and the non return valve but still no look at getting hot water tap to flow water someone please tell me where I'm going wrong

Scally1

21/10/2017 at 8:18pm
Location: None Entered
Outfit: None Entered

View Profile

Quote

Joined: 06/9/2017

Standard Member

Forum Posts: 2

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

Im still confused. Have cascade 2 on swift challenger 1998. Have problem with red light coming on on PMS2000 control panel showing heater fault. Have cold water running through hot tap. Switch with the red light is on under the seat by the heater. I thought should be running of electric in this case But when I went out and turned gas off, returned to find red light on. Switched gas on and red light went off.

So.... is this running of gas or electric?? I'm assuming gas as red light comes on when gas is off.... so how do i ensure its on electric only??

comtracdriver

09/1/2018 at 2:23pm
Location:
Outfit:

View Profile

Quote

Joined: 09/1/2018

Standard Member

Forum Posts: 36

Site Reviews Total:	0

Site Reviews 2024:	0
Site Reviews 2023:	0
Site Reviews 2022:	0
Site Reviews 2021:	0
Site Reviews 2020:	0
Site Reviews 2019:	0
Site Reviews 2018:	0

Site Nights 2024:	0
Site Nights 2023:	0
Site Nights 2022:	0
Site Nights 2021:	0
Site Nights 2020:	0
Site Nights 2019:	0
Site Nights 2018:	0

Why is no hot water coming from my Carver Cascade Rapide water heater, starts but the stops

In order to post a reply you will need to register, or if already registered please log in here

Prev Next
Jump To Page: 1 2
Quick Links - All Forums - Caravans and Caravanning - Top of Page

Printable version

Latest News, Discounts and Competitions see all...

5243 Visitors online !

Free UKCampsite.co.uk Window Sticker - Recommend to Friend - Add a Missing Campsite

[Message Forums] [Caravan Sites & Camping] [Company Listings] [Features / Advice] [Virtual Brochure] [Shop!]
[Reception] [Competitions] [Caravans & Motorhomes For Sale] [Event Diary] [Contact Us] [Tent Reviews]

Please note we are not responsible for the content of external sites & any reviews represent the author's personal view only. Please report any error here. You may view our privacy and cookie policy and terms and conditions here. All copyrights & other intellectual property rights in the design and content of this web site are reserved to the UKCampsite.co.uk © 1999 - 2024

UKCampsite.co.uk
2024 Advent Calendar

24 Daily Prizes PLUS a Christmas Day Star Prize worth £999

Request a Reminder