Joined: 23/2/2006 Diamond Member
Forum Posts: 3042
Site Reviews Total: | 11 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 3 |
Site Reviews 2021: | 1 |
Site Reviews 2020: | 2 |
Site Reviews 2019: | 1 |
Site Reviews 2018: | 1 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 11 |
Site Nights 2021: | 5 |
Site Nights 2020: | 9 |
Site Nights 2019: | 8 |
Site Nights 2018: | 1 |
|
What a good idea hereward, I might give it a go next weekend.
I have a piece of white plastic drain pipe from B&Q or similar cut down to 18/20 inches or so. I drilled a hole right thru both sides about 1/2 inch from top rim. Insert an 9 or 10 inch piece of thin bungee cord into one hole and fold it backon itself to form a loop, tiewrap it to hold this end in place. Push other end thru other hole and tie a knot on the end to stop it being pulled back thru.
Place pipe on tap outlet, loop bungee around back of tap and pull tight to hold it in place. (If you don't drill too big a hole it will automatically grip the cord when its pulled).
Dave
|