Joined: 15/5/2011 Diamond Member 
Forum Posts: 1615
| Site Reviews Total: | 1 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
| Site Nights 2018: | 0 |
|
As suspected your using two non compatible components ,for a standard non stabilised hitch you need a normal short 50mm towball which should also be liberally greased ,both towball and hitch .
If you had a alko type hitch it's a longer slimmer necked towball that's needed and should have the paint cleaned off before use and NEVER have any grease applied to either towball or hitch
So it's just lack of basic knowledge that has caused this and can be sorted out by simply changing your towball to a standard short necked one
|
Topic: Tow ball and socket . . .part company!
