It's not a major job to replace the socket if you are confident with your DIY ability.
As for the warranty they will probably blame the Hookup lead or say that the lead has been misused(pulled out by the cable)
saxo1
We had similar on a haven site a few years ago. Turns out little vandals had super glued the cable into the socket. Caravan engineer managed to remove and sort it
------------- Good cakes aren't cheap. Cheap cakes aren't good
Discounted Insurance Quotes for UKCampsite.co.uk visitors! Up to 12.5% off!
Quote: Originally posted by miss baritone on 13/8/2017
We had similar on a haven site a few years ago. Turns out little vandals had super glued the cable into the socket. Caravan engineer managed to remove and sort it
If all has failed suggest you undo the fixing of the caravan socket and disconnect wires ,then replace with a new one. Then either cut the plug off your lead and replace it or get a new lead. The problem may be if the pins were not making good contact they have been arcing and welded themselves together.
Quote: Originally posted by birdman101 on 13/8/2017
If all has failed suggest you undo the fixing of the caravan socket and disconnect wires ,then replace with a new one. Then either cut the plug off your lead and replace it or get a new lead. The problem may be if the pins were not making good contact they have been arcing and welded themselves together.
Might have to do that then just intrigued as to why it's stuck. Wouldn't the electric have tripped if that happened?
Quote: Originally posted by alibabaxx on 13/8/2017
Quote: Originally posted by birdman101 on 13/8/2017
If all has failed suggest you undo the fixing of the caravan socket and disconnect wires ,then replace with a new one. Then either cut the plug off your lead and replace it or get a new lead. The problem may be if the pins were not making good contact they have been arcing and welded themselves together.
Might have to do that then just intrigued as to why it's stuck. Wouldn't the electric have tripped if that happened?
no but a high current arcing bad connection is 99% likely to be the cause of the plug getting stuck..
replacing both plug and socket will be the best solution.. as as already been said.. cut off the plug first and then fit a new plug and socket..
Well warranty won't cover all apparently can't book in foe repair til September! No good if want to go caravaning next week ☹ unites electric still works whilst stuck in lol
A connection gap will cause arcing which can melt plastic and metal fusing things together with the heat build up, current doesn't need to be high, as others have said replace the lot. I had a fuse box in an old house half melted with a bad neutral connection, the heat damage is surprising
------------- Happy Days
Carnac twice the years before
Garangeoire Vendee 2 weeks july16
Garangeoire Vendee 2 weeks June 17
Strathclyde march 18, Anstruther Week April, Blairgowrie, May 18
Chateau de Lez-Eaux Saint Aubin Des Preaux 2 weeks 2018
Loree du bois Les Mathes 3 weeks jul19
Belhaven Bay 1 week july 2020
I would remove it from the 'van as birdman101 suggests. In the workshop you will be able to get behind the plug better ie in the direction you are trying to go.Then use the method suggested by bkb44b, even if you break it then you have minimised the chance of other damage and replacement is easy enough.
Had the same problem myself, according to the local dealer it is quite common with vans that have Alde heating, it is said that a worn socket or plug causes the pins to arc and fuse together, having your Alde set at 3kw is said to make it worse.
I had one that melted due to using Alde in winter.
I did manage to pull the plug off, it was a little stiff!
When checking the van fitment I noticed signs of melting.
I replaced the fitting as I am competent to do it.
If not sure get an electrician to do it.
I suspect the hook up lead was worn too so swapped to another.
------------- DS-There's more to life than football!!!
Why mess about? Remove the retaining screws in the battery box, pull some spare cable through and cut the offending joint off both cables and start again. The old one will never be safe to re-use anyway, so just scrap it.