Joined: 25/7/2005 Standard Member
Forum Posts: 92
Site Reviews Total: | 0 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
Thread the skirt through the rail from the wheel to the front, then from the wheel to the back.You will have some skirt actoss the wheel. The top of this section needs some rigid plastic strip whcih has a channel top and bottom, so it looks like a figure of 8 in cross section. This keeps it nice and rigid. Then you realise you should have threaded that onto the middle bit of the skirt before you threaded the skirt onto the rail either side of the wheel! You then have another bit of rail above the wheel. Thread another bit of skirt into that rail. Then you realise you actually need to have a piece with beading on both edges, so you can thread it into the rigid figure of 8 stuff which runs across the wheel. So you end up just tucking it behind the figure of 8 bit. Is that any clearer?
(Or you can thread it upside down into the fig. of 8 bit, and velcro the top edge onto the side of the van.)
Can you see I am speaking from experience?
|