Message Forums

Hi, does anyone out there know where I can lay my hands on the manuals for an Adria 400B ( i believe it to be anyway). Just bought the van last week and can't seem to get certain things to work (fire etc.). New to this and don't really know where to start.

The Older Adria manual was very basic, it covered ALL models and was still only a few pages of A5. Most of the appliances though were added onnce imported and their own manuals then supplemented Adria's

So what don't work??

Just the fire and the ignition switches on the hob really. Not that the hob bit bothers me, I'll just use matches.

The fire only seems to have a nob on the top that gooes from 1 to 9. You can turn it, push it and pull it and nothing happens.

Well the fire will be either a Carver SPL3002 or a Truma 3002 fire, whichever their one in the same.

A manual for the SPL3002 is on my website, if you print 'odd' pages and put them back in the printer back to front and upside down, then print 'even' pages you should end up with a booklet!

The likely hood with the hob ignition is it packup years ago and a replacement ignition module is expensive to say the least, make sure all connections are good and the switch/button makes a connection. Other than that it's matches I'm afraid

Once again, thanks for the great advice. 

'Cramer' hob/grill I think, not Carver, the fire might be Truma but it don't matter the manual on my website is for the identical Carver version.

As for the hob, as I remember Adria's, it's got a steel pressing that runs the length of the work top with all the contol knobs/switches located in it. Can you take a picture?

Can't take pics at the moment. Something else that's broke. Your right though, steel all the way along. The switches are, left to right:

Ignition button, nob with numbers and pic of flame, then 2 nobs for the burners, nob with numbers and pic of lightning and then the rocker switch which shows battery - plug - or nothing. 

Ignition button, knob with numbers and pic of flame =  piezo ignition and Fridge gas valve..3-2-1 or high - medium - low

2 knobs for the burners  = 2 knobs for burners

rocker switch which shows battery - plug - or nothing.= selection switch for 12v, 240v mains or off

Knob before selection switch, this will be thermostat while on mains operation of fridge

I would expect the fridge to be an RM212F although any 212 manual will do