Message Forums

I use a cylinder with the click on regulator. As a spare (and for its availability in Europe) I use a small Camping Gaz cylinder and they have a screw on regulator.

I cannot find an in line switch to just switch over from one cylinder to another.

My question is can I put in a t shape connector in the rubber hose (with all suitable jubilee clips on the joins of course) and have one side going to the clip on cylinder and one side going to the camping Gaz cylinder.Obviously one cylinder will be switched off while the other is in use. I tend to use the camping gaz just while I am replacing the main cylinder. and the gas could not escape out the other regulator as its switched off?

Is my idea OK or am I way off please?  

I think it can be done, not sure of what is available but I found this on Towsure, is it a starting point?

Link.

Dave.

 I have done a similar thing with 2xcalor gaslight cylinders connected to a t piece

 and it works fine just dont have both cylinders open at the same time! and yes

I am tight, watertight & Gastight

Quote: Originally posted by jjim on 23/3/2009

---

 I have done a similar thing with 2xcalor gaslight cylinders connected to a t piece

 and it works fine just dont have both cylinders open at the same time! and yes

I am tight, watertight & Gastight

---

Thanks for your help fellers. As usual you can rely on help on this site. Innit Great!  The switch thing is what I was looking for.

Regards

Robin

Good service from Caravan Tech. The switch arrived today.

Thanks again for the help

Robin